Item #: WQ52C4DR
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Revised 09/2010
Parts List
Hardware List
Wood dowel
Cam bolt
Cam lock
Door stopper
Door stopper
Medium screw
Large bolt
Handle
Small bolt
Door stopper plate
Small screw
Plastic pivot
Standard door hinge
Extra-large screw
Door hinge
Door hinge
Shelf support pin
Plastic wedge
Large screw
Wrench
Glue tube
W
*
Sticker
*Stickers (X) can be used to cover all visible cam locks after the stand is assembled.
Screw cam bolts (B) into top panel (1). Attach door stoppers (D,E) to top panel (1) usng medium
screw (F).
Attach legs (14) to bottom panel (2) using large bolts (G) and wrench (V). Insert dowels (A) into slats
(11,12,13). Screw cam bolts (B) into slat (11).
Screw cam bolts (B) into doors (15,16). Attach handles (H) to doors (15,16,17,18) using small bolts
(I). Attach door stopper plates (J) to doors (15,16,17,18) using small screws (K). Attach door hinge
(R) to door (17) and door hinge (P) to door (18) using small screws (K).
Screw cam bolts (B) into panels (3,4,5,6). Insert dowels (A) into panels (3,4,5,6) and shelves (8).
Screw cam bolts (B) into panels (19,20,21,22). Insert dowels (A) into shelves (23,24) and panels
(19,20,21,22).
Insert cam locks (C) into panel (8). Attach panels (3,5) to panel (8) using cam bolts and dowels as
guides. Tighten cam locks (C) with a screwdriver.
Insert cam locks (C) into panel (8). Attach panels (4,6) to panel (8) using cam bolts and dowels as
guides. Tighten cam locks (C) with a screwdriver.
Attach the assemblies from Step 6 and Step 7 to bottom panel (2) using large bolts (G) and wrench (V).
Attach slats (12,13) to slat (11) using cam bolts as guides. Insert cam locks (C) into slats (12,13) and
tighten with a screwdriver.
Attach the slat assembly from Step 9 to bottom panel (2) by inserting the dowels of the slat assembly
into the pre-drilled holes of bottom panel (2).
Slide back panels (9,10) into the stand assembly. Note that the back panels will slide down in the
grooves along the back of the stand assembly.
Insert cam locks (C) into the stand assembly. Attach top panel (1) to the stand assembly using cam
bolts and dowels as guides. Tighten cam locks (C) with a screwdriver.
Insert plastic pivots (L) into top panel (1) and bottom panel (2).
Insert door hinge (P) into bottom left plastic pivot (L). Slide door (17) into place by inserting pre-attached
door hinge (R) into top left plastic pivot (L). Attach door hinge (P) to door (17) using small screws (K).
Insert door hinge (R) into bottom right plastic pivot (L). Slide door (18) into place by inserting pre-attached
door hinge (P) into top right plastic pivot (L). Attach door hinge (R) to door (18) using small screws (K).
Attach panels (19,20) to shelves (23,24) using cam bolts and dowels as guides. Insert cam locks (C)
into shelves (23,24) and tighten with a screwdriver. Note that two cam locks will be inserted into
each shelf.
Attach panels (21,22) to shelves (23,24) using cam bolts and dowels as guides. Insert cam locks (C)
into shelves (23,24) and tighten with a screwdriver. Note that two cam locks will be inserted into
each shelf.
Attach the shelf assembly from Step 15 to door (15) using cam bolts and dowels as guides. Insert
cam locks (C) into panels (19,20) and tighten with a screwdriver. Note that two cam locks will be
inserted into each panel.
Attach the shelf assembly from Step 16 to door (16) using cam bolts and dowels as guides. Insert
cam locks (C) into panels (21,22) and tighten with a screwdriver. Note that two cam locks will be
inserted into each panel.
Align the door assembly from Step 17 with the left side of the stand and attach to the stand using
standard door hinges (M) and extra-large screws (N). Repeat this process on the right side of the
stand using the door assembly from Step 18.
Insert shelf support pins (S) into the stand interior at desired shelf height. Carefully place shelf (7) on
shelf support pins (S).
10
9
10
Secure back panels (9,10) using plastic wedges (T) and large screws (U).
|
Tektronix Stereo System WFM90 User Manual
Teledyne Automobile Parts HFM 60 User Manual
Thule Automobile Accessories 968 User Manual
Toshiba Flat Panel Television WLT68 User Manual
Tunturi Elliptical Trainer CE35 User Manual
Ultimate Ears DVD Player PD 500 User Manual
Uniden Cordless Telephone EXLI 8962 User Manual
VocoPro Car Amplifier HV 1200 User Manual
VTech Telephone DS3101 User Manual
Walker Indoor Furnishings W44CMPBL User Manual