Vertical Communications Telephone 8112N User Manual

R
DXP, DXP Plus, and FX Series  
Digital Communications System  
Non-LCD Station User’s Guide  
R
QZ  
ABC  
JKL  
DEF  
1
4
7
2
5
8
0
3
6
9
#
GHI  
MNO  
PRS  
TUV  
WXY  
SHIFT  
MUTE  
OPER  
TRNS/CNF  
HOLD  
SPEAKER  
TAP  
INTERCOM  
R
R
ABC  
JKL  
DEF  
1
4
7
*
2
5
8
0
3
6
9
#
GHI  
PRS  
MNO  
WXY  
QZ  
ABC  
DEF  
1
4
7
2
5
8
0
3
6
9
#
TUV  
GHI  
PRS  
JKL  
TUV  
OPER  
MNO  
WXY  
MESSAGE  
TAP  
TRNS/CONF  
SPEAKER  
MUTE  
TRNS/CNF  
HOLD  
TAP  
INTERCOM  
SPEAKER  
SHIFT  
MUTE  
HOLD  
 
GCA70–313  
Contents  
Contents  
1
Introducing The Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1  
1.1 Using This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1  
1.2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2  
1.3 Using Your Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . 1–3  
1.4 Knowing Your Telephone’s Functions . . . . . . . . . . . . . . . 1–7  
1.5 Understanding What The Lights Mean. . . . . . . . . . . . . . . 1–9  
1.6 Adjusting The Telephone Pedestal . . . . . . . . . . . . . . . . . 1–11  
2
3
Answering Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
2.1 Answering Outside Calls . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
2.2 Answering Intercom Calls . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
2.3 Answering Subdued Off-Hook  
Voice Announcement (SOHVA) Calls . . . . . . . . . . . . . . . 2–2  
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1  
3.1 Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1  
3.2 Dialing Automatically. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1  
3.3 Dialing Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3  
3.4 Redialing A Previously Dialed Number . . . . . . . . . . . . . . 3–3  
3.5 Using Line Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5  
3.6 Waiting For A Line (Queuing) . . . . . . . . . . . . . . . . . . . . . 3–6  
3.7 Making Intercom Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6  
3.8 Camping On At A Busy Station  
And Waiting For An Automatic Callback. . . . . . . . . . . . . 3–8  
3.9 Camping On At An Idle Station And  
Waiting For An Automatic Callback. . . . . . . . . . . . . . . . . 3–9  
3.10 Camping On At A Busy Station And  
Waiting For An Answer (Call Waiting). . . . . . . . . . . . . . 3–10  
3.11 Making A Subdued Off-Hook  
Voice Announcement (SOHVA) . . . . . . . . . . . . . . . . . . . 3–11  
4
Placing Calls On Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
4.1 Holding Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
4.2 Parking Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3  
Contents – 1  
 
Contents  
GCA70–313  
5
Transferring Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1  
5.1 Transferring Calls—Screened. . . . . . . . . . . . . . . . . . . . . . 5–1  
5.2 Transferring Calls—Unscreened . . . . . . . . . . . . . . . . . . . 5–2  
5.3 Making A Hot Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3  
6
7
Conferencing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1  
6.1 Conferencing Telephones Together. . . . . . . . . . . . . . . . . . 6–1  
Using The Other Telephone Features . . . . . . . . . . . . . . . . . . . 7–1  
7.1 Blocking Voice-Announce Calls. . . . . . . . . . . . . . . . . . . . 7–1  
7.2 Diverting Incoming Calls To Another Station . . . . . . . . . 7–2  
7.3 Forwarding Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3  
7.3 Listening To A Call Over  
The Telephone Speaker (Group Listening). . . . . . . . . . . . 7–4  
7.4 Muting Your Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . 7–5  
7.5 Setting A Do Not Disturb Condition At Your Station. . . . 7–6  
7.6 Setting The Volume Control . . . . . . . . . . . . . . . . . . . . . . . 7–7  
7.7 Setting Your Personal Ringing Tones . . . . . . . . . . . . . . . . 7–8  
7.8 Using Background Music . . . . . . . . . . . . . . . . . . . . . . . . . 7–9  
7.9 Using The IMIST Module. . . . . . . . . . . . . . . . . . . . . . . . 7–10  
8
9
Sending And Receiving Non-Verbal Messages . . . . . . . . . . . 8–1  
8.1 Using The Messaging Feature . . . . . . . . . . . . . . . . . . . . . 8–1  
8.2 Lighting The Message-Waiting Light. . . . . . . . . . . . . . . . 8–2  
8.3 Sending LCD Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3  
Programming Your Telephone . . . . . . . . . . . . . . . . . . . . . . . . 9–1  
9.1 Programming For Speed Dialing . . . . . . . . . . . . . . . . . . . 9–1  
9.2 Storing Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . 9–2  
9.3 Storing DSS Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–3  
9.4 Storing Feature Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4  
9.5 Storing The Response Message Button . . . . . . . . . . . . . . 9–6  
10 Operating Your Telephone With A DSS/BLF Console . . . 10–1  
10.1 Operating Your Telephone With A DSS/BLF Console. . 10–1  
2 – Contents  
 
GCA70–313  
Contents  
11 Troubleshooting Your Telephone . . . . . . . . . . . . . . . . . . . . . 11–1  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index –1  
Quick Reference Guide. . . . . . . . . . . . . . . . . . . . . Quick Reference–1  
Contents – 3  
 
This page remains blank intentionally.  
 
GCA70–313  
Introducing The Telephone  
Introducing The Telephone  
1
1.1 Using This Guide  
This user’s guide describes your Comdial Impact telephone and tells you  
how to use it. The sections in this introductory chapter help you become  
familiar with your telephone’s controls and indicators. The remaining  
sections are titled as follows:  
1.2 Overview  
1.3 Using Your Speakerphone  
1.4 Knowing Your Telephone’s Functions  
1.5 Understanding What The Lights Mean  
The operation chapters define often-used features and provide  
instructions for their use. These chapters are titled as follows:  
2
3
4
5
6
Answering Calls  
Making Calls  
Placing Calls On Hold  
Transferring Calls  
Conferencing Calls  
The special-purpose features of the telephone are grouped into one  
chapter:  
7
Using The Other Telephone Features  
Your telephone provides several non-verbal way to communicate using  
lights and indicators. The descriptions of these methods are provided in a  
separate chapter titled:  
8
Sending And Receiving Non-Verbal Messages  
You can program many of the buttons on your telephone to enhance the  
unit’s versatility and usability. These programming instructions are found  
in the following chapter:  
9
Programming Your Telephone  
Station User's Guide 1 – 1  
 
Introducing The Telephone  
GCA70–313  
For your convenience, a troubleshooting chart is provided in the  
following chapter:  
10  
Troubleshooting Your Telephone  
There is a quick reference chart in the following chapter:  
Appendix A Quick Reference Guide  
1.2 Overview  
This user’s guide covers five different telephone models. The overall  
operation of each of the telephones is very similar. There are, however,  
several differences  
The 8112N and 8212N do not have speakerphone capability.  
Therefore, you must lift the handset to perform any telephone  
functions: making calls, answering calls, programming your  
telephone, etc.  
The 8112N and 8212N cannot receive voice announce calls.  
The 8112N and 8212N cannot use the Group Listen feature.  
The 8112N and 8212N cannot use the Background Music feature.  
The 8112N does not have any LEDs beside its programmable  
buttons and therefore does not provide any status indications for  
these buttons.  
The 8112N does not have a mute key.  
The 8112N does not have a handset volume control.  
The IMIST module only works with the 8212S and 8212N  
telephones.  
The 8124S and 8112S telephones have a rocker switch style volume  
control instead of separate volume up and volume down buttons.  
Message waiting lights:  
On the 8124S and 8112S, the message waiting light is above the  
HOLD button.  
On the 8112N, the message waiting light is above the dialpad.  
On the 8212S and 8212N there is a dedicated message button with  
an associated light beside it.  
Only the 8212S and 8212N support the ICVOL handset with  
independent volume control.  
1 – 2 Station User's Guide  
 
GCA70–313  
Introducing The Telephone  
1.3 Using Your Speakerphone  
On the speakerphone-equipped models, the microphone and loudspeaker  
are farther away from you than when you use a handset. Both the signal  
from the loudspeaker and the signal to the microphone must be  
strengthened. When microphones and loudspeakers are close together  
(such as in a speakerphone), additional amplification typically generates  
a ringing sound (public address systems do this if the volume is too high  
or the microphone is too close to a loudspeaker).  
Your speakerphone’s sound-activated switches allow either the  
microphone or the loudspeaker to be on at a given time. This means that  
sounds travel in only one direction at a particular moment.  
Station User's Guide 1 – 3  
 
Introducing The Telephone  
GCA70–313  
Speakerphone User Guidelines  
Both parties cannot talk at the same time. You must wait for  
silence out of your loudspeaker before talking. You must stop  
talking to hear the other party.  
Background noise may prevent the sound-activated switches from  
operating properly. Avoid placing the speakerphone where it will  
detect sounds from typewriters, keyboards, printers, paging  
systems, and other equipment.  
Speak slightly louder than normal and with a clear, authoritative  
voice. For the microphone to best detect your voice, speak within  
three feet of it and face the telephone.  
Raising the volume of the loudspeaker makes it easier for the  
sound-activated switches in your telephone to select the distant  
party’s voice. Lowering the volume of the loudspeaker makes it  
easier for the switches to select your voice.  
Since the system takes several seconds to provide the best  
switching, constant sound patterns—such as elongating your  
words and playing externally-supplied music—may prevent the  
sound-activated switches from operating properly.  
Place the telephone on a hard surface and away from table edges.  
Do not place the telephone in corners or enclosures. Do not let  
obstructions come between you and the microphone. Rooms with  
hard, flat surfaces that reflect sound may affect the  
sound-activated switches.  
If you are using a handset and the other party is using a  
speakerphone, avoid breathing heavily into your microphone.  
Avoid other sounds that may affect the distant telephone’s  
sound-activated switches.  
In some situations, such as when either you or the distant party are  
in a noisy environment, you may have to lift your handset to  
ensure a clear conversation.  
When both you and the distant party use speakerphones, the  
sound-activated switches can occasionally detect both voices  
simultaneously, thus blocking out both voices.  
1 – 4 Station User's Guide  
 
GCA70–313  
Introducing The Telephone  
Line Buttons,  
DSS/BLF Buttons  
Programmable Buttons  
Handset  
Intercom Button*  
Dialpad*  
R
ABC  
JKL  
DEF  
1
4
7
*
2
5
8
0
3
6
9
#
GHI  
PRS  
MNO  
WXY  
Telephone Speaker  
TUV  
Message Button*  
TAP Button*  
MESSAGE  
TAP  
Transfer/Conference Button*  
TRNS/CONF  
SPEAKER  
MUTE  
Speaker Button*  
Mute Button*  
HOLD  
SCS001  
Volume Up  
Volume Down  
Hold Button*  
Microphone Opening  
*NOTE: These are default button locations.  
Your system installer may have reprogrammed  
these buttons to better suit your needs.  
Impact SCS 8212S Speakerphone  
Line Buttons,  
DSS/BLF Buttons  
Programmable Buttons  
Handset  
R
Dialpad*  
ABC  
JKL  
DEF  
1
4
7
*
2
5
8
0
3
6
9
#
GHI  
MNO  
WXY  
PRS  
TUV  
Intercom Button*  
Message Button*  
TAP Button*  
MESSAGE  
TAP  
TRNS/CONF  
SPEAKER  
MUTE  
Transfer/Conference Button*  
Mute Button*  
HOLD  
SCS002  
Volume Up  
Volume Down  
Hold Button*  
*NOTE: These are default button locations.  
Your system installer may have reprogrammed  
these buttons to better suit your needs.  
Impact SCS 8212N Telephone  
Station User's Guide 1 – 5  
 
Introducing The Telephone  
GCA70–313  
INL001  
Handset  
Speaker  
Line Buttons,  
DSS/BLF Buttons,  
Dialpad  
R
Programmable Buttons  
QZ  
ABC  
DEF  
Transfer/  
Conference  
Button  
1
4
7
2
5
8
0
3
6
9
#
GHI  
JKL  
TUV  
OPER  
MNO  
WXY  
Volume Down  
PRS  
Volume Up  
Message  
Waiting  
Light  
TRNS/CNF  
HOLD  
Mute Button  
TAP  
INTERCOM  
SPEAKER  
SHIFT  
MUTE  
Shift Button  
Intercom Microphone  
Button Opening  
Speaker  
Button  
Hold Button  
TAP Button  
Connectors On Bottom Of Telephone  
Handset  
Line Cord  
!
Impact 8124S Speakerphone  
Handset  
Speaker  
R
Line Buttons,  
DSS/BLF Buttons,  
Dialpad  
Transfer/  
Conference  
Button  
Programmable Buttons  
Volume Down  
QZ  
ABC  
JKL  
DEF  
1
4
7
2
5
8
0
3
6
9
#
Volume Up  
Message  
Waiting  
Light  
GHI  
MNO  
PRS  
TUV  
WXY  
SHIFT  
MUTE  
Shift Button  
Mute Button  
OPER  
TRNS/CNF  
HOLD  
SPEAKER  
TAP  
INTERCOM  
Speaker Button  
imp001  
Hold Button  
TAP Button  
Intercom  
Button  
Microphone  
Opening  
Connectors On Bottom Of Telephone  
Handset  
Line Cord  
!
Impact 8112S Speakerphone  
Line Buttons,  
DSS Buttons,  
Handset  
Programmable Buttons  
1
4
7
QZ  
2
5
8
ABC  
JKL  
3
6
9
DEF  
GHI  
MNO  
WXY  
Dialpad  
PRS  
TUV  
Transfer/  
Conference  
Button  
0OPER  
#
R
TAP Button  
TRNS/CNF  
HOLD  
TAP  
INTERCOM  
Hold Button  
Intercom Button  
IMP002  
Impact 8112N Telephone  
1 – 6 Station User's Guide  
 
GCA70–313  
Introducing The Telephone  
1.4 Knowing Your Telephone’s Functions  
Your telephone provides many versatile features for your use. These  
features are explained in terms of what they allow you to do. Refer to  
section 1.5, Understanding What The Lights Mean, for information about  
the lights associated with your telephone’s buttons.  
Hold Button  
Places a line or Intercom call on hold.  
Stores pauses in number sequences during programming.  
Intercom Button  
Selects an intercom path.  
Allows you to initiate many of the telephone’s features.  
Message-Waiting Light  
Indicates that a message awaits pick up.  
Microphone Opening  
Allows hands-free operation of speakerphone (not available on  
8112N and 8212N).  
Mute Button  
Keeps the person on the line from hearing your conversation (not  
available on 8112N).  
Programmable Buttons  
Allow you to store numbers for automatic dialing functions.  
Allow you to store telephone extension numbers for Direct Station  
Selection (DSS).  
Indicate which lines are either in use, ringing, or on hold.  
Shift Button  
Allows you to enter a second tier for storing and/or automatically  
dialing speed dial numbers. That is, you can store two speed dial  
numbers at every programmable button location—one in the regular  
tier and one in the second tier. You activate the shift function by  
pressing this button and turning the shift light on before storing or  
automatically dialing a speed dial number from the second tier.  
Station User's Guide 1 – 7  
 
Introducing The Telephone  
GCA70–313  
Speaker (not available on 8112N and 8212N)  
Sounds distant party’s voice.  
Sounds ringing and call-in-progress tones.  
Speaker Button (not available on 8112N and 8212N)  
Turns your speaker on or off.  
Disconnects a call when you are on a handsfree call.  
Ends or cancels programming.  
TAP Button  
Recalls dial tone or generates a hookflash.  
Retrieves held calls or last call placed on hold.  
Transfer/Conference Button  
Transfers calls  
Sets up conference calls.  
Volume Control  
Regulates the volume of the ringer, speaker, handset, headset,  
background music, and group listening mode.  
1 – 8 Station User's Guide  
 
GCA70–313  
Introducing The Telephone  
1.5 Understanding What the Lights Mean  
The lights (LEDs) on your telephone indicate the status of lines, features,  
and intercom.  
Next to a Direct Station Select (DSS)/  
Busy Lamp Field (BLF) button:  
Steady red = station is in use.  
Flashing red = station is receiving a call.  
Winking red = message-waiting light set for you by station  
associated with that DSS button.  
Next to a line button:  
Steady green = line is in use at your station.  
Steady red = line is in use at another station.  
Flashing red = your line is ringing.  
Flashing orange = your line is ringing and will be answered when  
you lift the handset.  
Winking green = line is on hold at your station.  
Winking red = line is on hold at another station  
Fluttering orange = line has recalled from hold at your station.  
Fluttering red = line has recalled from hold at another station.  
Next to a fixed feature or programmable feature button:  
Steady red = the feature is on.  
Steady off = the feature is off.  
Next to an INTERCOM button:  
Steady green with a quick flash = you are using your intercom.  
Winking red = a message is set on your telephone for others to  
receive when calling.  
Flashing orange = another station is calling you.  
Above the HOLD button:  
Fluttering red = message awaits pick up.  
Winking green = a line is on hold at your station.  
Station User's Guide 1 – 9  
 
Introducing The Telephone  
GCA70–313  
Above the SPEAKER button:  
On steady (with telephone on hook and busy) = speakerphone mode  
is active.  
On steady (with telephone on hook and idle) = background music is  
turned on.  
Flashing = feature viewing and programming is in progress.  
Above the MUTE button:  
On steady = called party cannot hear your conversation.  
Above the SHIFT button:  
On steady = shift mode is activated to allow access to second level  
speed dial numbers programmed at DSS button locations.  
1 – 10 Station User's Guide  
 
GCA70–313  
Introducing The Telephone  
1.6 Adjusting The Telephone Pedestal  
(Models 8212S and 8212N only)  
Your telephone has an adjustable pedestal to allow you to select the most  
comfortable viewing angle. When you receive the telephone, the pedestal  
is in its lowest position—flush against the pedestal.  
To adjust the pedestal,  
1. Grasp the rear of the pedestal base firmly with one hand while  
lifting the rear portion of the telephone upward with your  
other hand.  
2. While pivoting the telephone upward with one hand, pivot the  
telephone supporting arms upward with your other hand while  
feeling for the notches under the telephone. Notice there are  
three sets of notches under the telephone corresponding to the  
three positions available.  
3. When the telephone is at the desired height, find the closest  
pair of notches and place the supporting arms in the notches.  
Press down slightly on the telephone until you feel the  
supporting arms snap into place.  
Telephone  
First Notch  
Second Notch  
Third Notch  
(For Highest Position)  
Supporting Arm  
PED01  
Pedestal Base  
Station User's Guide 1 – 11  
 
This page remains blank intentionally.  
 
GCA70–313  
Answering Calls  
Answering Calls  
2
2.1 Answering Outside Calls  
A call that rings on an outside line will sound long, single-tone bursts  
and will light the line status light. If the installer enabled ringing line  
preference at your station, an orange light flashes next to the line that  
your station will answer when you lift the handset; a red light will flash  
for any other ringing line.  
When you hear outside ringing and observe a flashing light,  
answer the call as follows:  
1. Lift handset or press line button and speak toward telephone if  
light is orange,  
—OR—  
press button of ringing line if flashing light is red, and speak  
toward the telephone (lift handset if you desire privacy).  
2.2 Answering Intercom Calls  
An intercom call is a call between two system telephones. An intercom  
party can voice-announce through your speaker instead of ringing your  
telephone (intercom ringing sounds two short ring bursts).  
You can block voice-announce calls if you wish. See the discussion titled  
Blocking Voice Announce Calls for details.  
When you hear intercom ringing followed by a caller’s voice,  
1. Speak toward the telephone to answer (lift handset if you desire  
privacy).  
When you hear intercom ringing (two short ring bursts),  
1. Lift handset or press INTERCOM and speak toward telephone.  
Station User's Guide 2 – 1  
 
Answering Calls  
GCA70–313  
2.3 Answering Subdued Off-Hook  
Voice Announcement (SOHVA) Calls  
Your installer can set your speakerphone to receive a Subdued Off-Hook  
Voice Announcement (SOHVA). This feature allows an intercom caller  
to break into your call by making an announcement through your handset  
receiver. (This means that if you are on a speakerphone call, you cannot  
receive a SOHVA call). The distant party that your are currently talking  
to cannot hear the announcement made by SOHVA caller.  
Please note that you can receive a SOHVA call even if your are using  
your headset; however, the distant party may be able to hear the SOHVA  
as it is made.  
You can respond to a SOHVA in one of two ways:  
Verbally: Press and hold the MUTE button and speak into handset.  
Distant party cannot hear response. To return to distant party after  
your reply is complete, release the MUTE button. (Since the 8112N  
does not have a MUTE button, this feature is not available on that  
telephone. If your have an 8112N telephone, you must use the  
procedure described below to respond to a SOHVA.)  
Non-Verbally (Response Messaging): If the announcing station has  
an LCD speakerphone, press a preprogrammed RESPONSE  
MESSAGE button to cause a message to appear in the display of the  
telephone making the SOHVA call and then that telephone is  
automatically disconnected from your telephone. (If the telephone to  
which you attempt to send a non-verbal message is not an LCD  
telephone, no message is sent and that station is immediately  
disconnected from the call.)  
You can also block all SOHVA calls to your station by enabling the Voice  
Announce Block feature (discussed in the chapter titled Using The Other  
Telephone Features).  
2 – 2 Station User's Guide  
 
GCA70–313  
Making Calls  
Making Calls  
3
3.1 Making Calls  
The 8212N and 8112N telephones require that you lift the handset before  
performing any operations with the telephone. When using the 8212S,  
8112S, and 8124S, however, you may do one of three things in order to  
use the telephone: lift the handset, press the INTERCOM button, or  
press the SPEAKER button.  
3.2 Dialing Automatically  
The Automatic Dialing feature provides one- or two-button speed dialing  
using programmable buttons with stored numbers. Two levels of number  
storage are available at each storage location, and you can use one or  
both levels as needed. Further, since you usually store a line choice as  
part of a speed dial number, line selection is automatic with speed  
dialing. This user’s guide discusses button programming in a separate  
section. Refer to it when you are ready to store numbers at the  
programmable buttons.  
There are two types of speed dial numbers: (1) numbers that you store  
for your own use (personal speed dial numbers), and (2) numbers that the  
system attendant stores for everyone’s use (system speed dial numbers).  
To automatically dial a speed dial number stored at one of the  
programmable buttons on your station (8124S, 8112S, and 8212S),  
1. Press preprogrammed speed dial button (line selection is usually a  
part of the stored speed dial number),  
—OR—  
press SHIFT button, then press preprogrammed button (to choose  
number stored as a second choice at that button).  
Station User's Guide 3 – 1  
 
Making Calls  
GCA70–313  
To automatically dial a speed dial number stored at one of the  
programmable buttons on your station (8112N and 8212N),  
1. Lift handset and press TAP.  
2. Press preprogrammed speed dial button (line selection is usually a  
part of the stored speed dial number),  
—OR—  
press SHIFT button, then press preprogrammed button (to choose  
a number stored as a second choice at that button).  
With your station idle, you can automatically dial a personal or system  
speed dial number stored at a dial pad location.  
To speed dial a personal number stored at the dial pad (8124S,  
8112S and 8212S),  
1. While on hook, press speed dial number on dial pad (0–9).  
To speed dial a personal number stored at the dial pad (8112N  
and 8212N),  
1. Lift handset and press TAP.  
2. Press speed dial number on dial pad (0–9).  
To speed dial a system number stored at the dial pad (8124S,  
8112S and 8212S),  
1. While on hook, press and then dial system speed dial number  
(100–599).  
To speed dial a system number stored at the dial pad (8112N and  
8212N),  
1. Lift handset and press TAP.  
2. Press and then dial system speed dial number (000–999).  
NOTE: If you are already on a line, you must press SHIFT before  
dialing the personal or system speed dial numbers that are  
stored at the dial pad. Also, if a speed dial’s preselected line is  
in use, the speed dial will not engage.  
NOTE: Earlier systems have only 100–299 or 100–599 as  
system speed dials.  
3 – 2 Station User's Guide  
 
GCA70–313  
Making Calls  
3.3 Dialing Manually  
You can manually dial a number over any telephone line you select. Or,  
if the installer assigned a prime line or the idle line preference feature to  
your speakerphone, it will automatically select a line for use when you  
lift the handset.  
To dial an outside number manually,  
1. Lift handset or press line button and dial number.  
3.4 Redialing A Previously Dialed Number  
The system temporarily saves the first 16 digits of the last manually  
dialed number for your redial use—if the last number you called is busy  
or is not answering, you can redial it once or initiate repeated redialing.  
Subsequent dialing activity overwrites a temporarily saved number.  
If you wish to permanently save a number for later redial, refer to section  
9.2, Storing Speed Dial Numbers.  
If a distant party tells you an important telephone number and you want  
to immediately save it for later redial, you can use a SAVE NUMBER  
REDIAL button to save the first 16 digits of that number.  
To automatically redial the last dialed number,  
1. Press and release the hookswitch to disconnect current ringing or  
busy tone (press TAP if using a 8112N or 8212N telephone).  
2.  
Press #.  
3. Listen for ringing or busy tone over the telephone speaker.  
Ringing tone: When party answers, pick up handset if you desire  
privacy.  
Busy tone: Press SPEAKER to disconnect (hang up to disconnect  
on the 8112N and 8212N telephones).  
To store a number while you are on a call,  
1. Press preprogrammed SAVE NUMBER REDIAL button twice.  
2. Dial the number that you wish to save (the system immediately  
saves the number for later redial—it does not dial it over the line  
that you are now on).  
Station User's Guide 3 – 3  
 
Making Calls  
GCA70–313  
To later redial the saved number,  
1. Lift handset or press line button.  
2. Press SAVE NUMBER REDIAL button (system automatically  
dials the number that you saved earlier).  
3.4.1 Using The Automatic Redial Feature  
(8124S, 8112S and 8212S only)  
If your station has the multiple automatic redial feature enabled, you can  
place up to 10 numbers in your telephone’s redial queue. Your telephone  
will redial the numbers one at a time, in the order you placed them in the  
queue, until (a) the call is answered, (b) you cancel the automatic redial  
feature for a particular number, or (c) your telephone has dialed the  
number a preprogrammed number of times (set by your system installer).  
To use the automatic redial feature to redial a busy or  
unanswered number,  
1. While the telephone is idle, press 70 or press the AUTOMATIC  
REDIAL button programmed by your installer.  
2. The system queues the last number dialed that is not already in the  
queue and repeatedly dials the number until you cancel the feature  
or the system has dialed the number a preprogrammed number of  
times (determined by your system installer).  
3. The AUTOMATIC REDIAL light flashes between redials and  
turns on steady during redialing.  
4. When the distant party answers the call, the AUTOMATIC  
REDIAL button while on the call to cancel automatic redialing,  
—OR—  
if your installer has enabled answer supervision on your line, the  
system automatically cancels automatic redialing and turns the  
AUTOMATIC REDIAL light off.  
5. If your system installer has enabled the redial multiple numbers  
feature, you can have up to 10 numbers in your redial queue. To  
add numbers to your redial queue, repeat step 1 in the above  
procedure.  
3 – 4 Station User's Guide  
 
GCA70–313  
Making Calls  
To interrupt the redialing procedure so that you can use your  
telephone to make a call,  
NOTE: You can only do this if the suspend automatic redial feature is  
enabled.  
1. While your telephone is in the process of dialing a number, press  
the AUTOMATIC REDIAL button twice. This treats the number  
as answered, and then puts the number back in the automatic redial  
queue.  
To cancel the automatic redial feature,  
NOTE: You can only do this if the suspend automatic redial feature is  
disabled or while the telephone is in the process of autodialing.  
1. Perform any user activity at the station (go on-hook, press the  
speaker button, etc.),  
—OR—  
press # 72 to delete all numbers from the redial queue,  
—OR—  
press the AUTOMATIC REDIAL button while the number you  
wish to remove from the redial queue is ringing.  
NOTE: The system allows only ten numbers in the redial queue. In  
order to add a number to a full redial queue, you must remove  
one of the numbers from the queue before dialing the new  
number.  
3.5 Using Line Groups  
Some systems have telephone lines arranged into line groups. These line  
groups are available at each telephone. When line groups are available  
for your use, you may access them for outside calling instead of pressing  
a line button to select an individual line for use.  
To access line groups,  
1. Lift handset or press INTERCOM.  
2. Dial desired line group access code:  
9 = line group 1  
80 through 89= line groups 2 through 11  
60 through 64 = line groups 12 through 16  
3. Dial desired number.  
Station User's Guide 3 – 5  
 
Making Calls  
GCA70–313  
3.6 Waiting For A Line (Queuing)  
If all the lines in a line group are busy, you can place your telephone in a  
queue to await an idle line. When you share a line with another telephone  
and the line is busy, you can place your telephone in a queue to await the  
idle line.  
To queue for a line group,  
1. Lift handset or press INTERCOM.  
2. Dial the line group access code.  
3. Dial 6.  
If you have line appearance for a particular line and wish to  
queue for it,  
1. Note the busy status light (LED).  
2. Lift handset or press INTERCOM.  
3. Dial 6.  
4. Press line button.  
When line group is free, your telephone sounds several short tone bursts.  
When you hear this, lift handset, hear dial tone, and place call.  
To cancel line group queuing,  
1. Lift handset or press INTERCOM.  
2. Dial # 6 and hang up.  
3.7 Making Intercom Calls  
You can dial an intercom extension manually from the dial pad or  
automatically using a direct station select (DSS) button you have  
programmed. There are two methods for making an intercom call. One  
causes the called telephone to ring. The other causes your voice to sound  
out at the called telephone. Your installer can set the system to deliver  
either tone-first or voice-first calling, although all systems have tone-first  
as the default condition.  
Keep in mind that whatever the system setting, a called party can set a  
voice announce block condition at his or her telephone to prevent all  
voice announce calls. Furthermore, if he or she blocks voice announce,  
the system also blocks SOHVA calls.  
3 – 6 Station User's Guide  
 
GCA70–313  
Making Calls  
(The following instructions assume a tone-first default setting. Any user  
can change a call to voice announce signaling by pressing the  
INTERCOM button again after dialing the extension number or by  
pressing the DSS button again.)  
To manually cause the other telephone to ring,  
1. Lift handset or press INTERCOM.  
2. Dial extension number (called telephone will ring).  
To tone call automatically,  
1. Press DSS button (called telephone will ring).  
(The following instructions assume a voice-first default setting. Any user  
can change a call to tone signaling by pressing the INTERCOM button  
again after dialing the extension number or by pressing the DSS button  
again.)  
To voice announce manually,  
1. Lift handset or press INTERCOM.  
2. Dial extension number.  
3. Speak your announcement.  
To voice announce automatically,  
1. Lift handset and press DSS button.  
2. Speak your announcement.  
Some systems will be arranged so that certain stations have a hot line  
feature. If your station is so arranged, every time you lift the handset,  
your speakerphone will automatically ring a preselected station  
(programmed by the installer). To make an intercom call to a station  
other than this hot line station, or to make a call on an outside line, you  
must press an intercom or line button before you lift the handset; then  
you can dial the number.  
Station User's Guide 3 – 7  
 
Making Calls  
GCA70–313  
3.8 Camping On At A Busy Station  
And Waiting For An Automatic Callback  
If you call another station and receive a busy tone or a Do Not Disturb  
tone, you can press a button that will cause the system to ring your  
telephone when the station is available. This is called “camping on at a  
station.” Please note that you can camp on to only one station at a time.  
To camp on at any busy station,  
1. Dial 6 when you hear a busy tone.  
2. Hang up the handset. When the station you called becomes  
available, your telephone will ring with five short tone bursts.  
When you hear five short tone bursts,  
1. Lift handset or press INTERCOM. The other telephone will start  
ringing.  
If you do not lift the handset or press INTERCOM after the ring back  
tones, within the time limit set by the installer, the system cancels the  
call back.  
To cancel the call back before your telephone sounds the tone  
bursts,  
1. Lift handset or press INTERCOM and dial # 6.  
To camp on at a station with a Do Not Disturb condition set,  
1. Dial 6 when you hear a DND tone and hang up the handset. A  
call back will occur when called station is no longer set in the Do  
Not Disturb mode.  
3 – 8 Station User's Guide  
 
GCA70–313  
Making Calls  
3.9 Camping On At An Idle Station  
And Waiting For An Automatic Callback  
If you call another station and hear ringing but receive no answer, you  
can press a button that will cause the system to ring your telephone when  
any activity is initiated at that station.  
To camp on at a station for which you hear ringing but receive no  
answer,  
1. Dial 6 and hang up the handset. Callback will occur after any  
activity is initiated at dialed station. You may cancel the camp-on  
condition at any time by pressing INTERCOM and dialing # 6.  
NOTE: If you make a call in the voice announce mode and receive no  
answer at the called station, the CALLBK option will still be  
available to you.  
Station User's Guide 3 – 9  
 
Making Calls  
GCA70–313  
3.10 Camping On At A Busy Station And  
Waiting For An Answer (Call Waiting)  
If the telephone you have called is busy, you can send a call-waiting tone  
to the telephone and wait on the line for an answer (you must be using  
the handset for this feature to work).  
To activate call waiting when you hear a busy tone,  
1. Dial 6 (called party hears tone).  
2. Wait on line for reply.  
Called party can place the current call on hold or disconnect from the  
call to answer your call-waiting tone, or choose to ignore your  
call-waiting tone and continue current conversation.  
To cancel call waiting,  
1. Lift handset or press INTERCOM, then dial # 6.  
2. Hang up the handset or press SPEAKER to end.  
To answer a call-waiting tone if you receive one while on a call,  
1. Hear short tone burst in receiver.  
2. Either place current call on hold or complete call and hang up  
(waiting call will ring at your telephone).  
3. Lift handset to answer call.  
You may, of course, choose to ignore the call-waiting tone and remain on  
the line with your original caller.  
3 – 10 Station User's Guide  
 
GCA70–313  
Making Calls  
3.11 Making A Subdued Off-Hook  
Voice Announcement (SOHVA)  
You can make a subdued voice announcement to another station that is  
off-hook and busy on a call if the system is arranged to provide this  
feature. Your telephone provides a SOHVA button for this purpose. You  
decide whether to deliver a SOHVA message, camp on at that station, set  
a message-waiting indicator, or hang up when you hear an intercom busy  
tone.  
Make a SOHVA announcement using the SOHVA button as  
follows:  
1. Make intercom call and hear busy tone.  
2. Decide whether to interrupt or not.  
3. If you decide not to interrupt the called party, hang up,  
—OR—  
to interrupt, press preprogrammed SOHVA button and hear several  
quick tone bursts.  
5. Make announcement (busy tone means that the called telephone is  
in speakerphone mode and you cannot make announcement, that  
your SOHVA has been denied through system programming, or  
that the called party has blocked your SOHVA).  
6. Wait on line for verbal reply.  
NOTE: The caller cannot control how the announcement is received.  
This depends upon the equipment used and station  
programming.  
Station User's Guide 3 – 11  
 
This page remains blank intentionally.  
 
GCA70–313  
Placing Calls On Hold  
Placing Calls On Hold  
4
4.1 Holding Calls  
You can place a call on hold and pick it back up a short time later. With a  
regular hold, you can pick up the held call at your telephone or another  
user can pick up the call. With an exclusive hold condition, you must  
pick up the held call at your telephone; no other telephone has access to  
it. The Hold feature also allows you to answer and place on hold a call  
that is on a line that does not appear at your telephone (a call that is  
parked or transferred to you, for instance).  
After a call has been on hold for a period of time (set by the system  
installer), the system will cause a one-second tone burst to sound at your  
telephone, and speed up the flash rate of the line button light. If the call  
is on exclusive hold, it will revert to manual hold after this hold recall  
time period.  
When you answer a call on a group intercom and place it on hold, the  
system keeps the call on hold on the group intercom. This means that  
you can pick up this call at any station that has access to the group  
intercom.  
To place a call on hold,  
1. Press HOLD.  
To retrieve a held call,  
1. Press line button of the held call (with flashing light),  
—OR—  
press TAP.  
NOTE: Pressing the TAP button always retrieves the last number  
placed on hold, regardless of whether you have line  
appearance for the line on which the call is holding.  
Station User's Guide 4 – 1  
 
Placing Calls On Hold  
GCA70–313  
To place a call on exclusive hold,  
1. Press HOLD twice and hang up handset.  
To retrieve an exclusive hold,  
1. Press line button of held call (button with flashing light), or press  
TAP (if station does not have line appearance).  
To place a call on hold at another telephone,  
1. Press INTERCOM.  
2. Dial 90.  
3. Dial extension number of station to receive held call. Your  
telephone automatically hangs up.  
To retrieve a held call at another station,  
1. Press INTERCOM.  
2. Dial # 90.  
3. Dial extension number of station to receive held call.  
4. Answer call.  
To answer a call at the extension receiving held call,  
1. Press INTERCOM.  
2. Dial # 90.  
4 – 2 Station User's Guide  
 
GCA70–313  
Placing Calls On Hold  
4.2 Parking Calls  
You can place a call on hold in the system so that any station that does  
not have line appearance for the call can answer it. You accomplish this  
by placing the call in one of nine park orbits, where the call remains until  
it is answered. If the call is not answered within a specified period of  
time, the system will send it back to your station for service (this is  
known as park recall).  
When you press a personal or group intercom button and dial a code to  
retrieve a parked call, the system removes it from the park orbit and  
places it at your station.  
You can program a PARK button at your telephone and use it to simplify  
call parking.  
To park a call,  
1. While on the call, press INTERCOM.  
2. Press .  
3. Dial code for park orbit (91–99 for orbit 1–9).  
4. Remember the code for later use or make it known to those who  
need to know it in order to retrieve the call.  
To park a call using a preprogrammed PARK button,  
1. While on the call, press the preprogrammed PARK button (the call  
is placed in a preselected park orbit).  
If call is not retrieved within a programmable time limit, it reverts to the  
parking station as a standard held call, and only one call can be placed in  
an orbit at a time.  
To retrieve a parked call,  
1. From any station, press INTERCOM.  
2. Press #.  
3. Dial park orbit access code (91–99 for orbit 1–9), or press  
preprogrammed PARK button.  
4. Answer call.  
Station User's Guide 4 – 3  
 
This page remains blank intentionally.  
 
GCA70–313  
Transferring Calls  
Transferring Calls  
5
5.1 Transferring Calls—Screened  
You can answer a call at your telephone and transfer it to another  
telephone. If you first identify the caller to the party receiving the  
transfer (giving that user the opportunity to prepare for the call), you  
have made a screened transfer.  
If the telephone to which you are transferring the call is busy, you must  
recover the call yourself or choose one of several options that may be  
available at your station. Also, if a transferred call is not answered after a  
certain length of time (as set by the installer), it recalls to your telephone.  
Again, you have several options for servicing the returning call.  
To screen and transfer a call to another telephone in the system,  
1. Answer call.  
2. Press TRANSFER/CONFERENCE (call is placed on hold).  
3. Dial extension number of station to receive transfer, or press DSS  
button for that station.  
4. When intercom party answers, announce call.  
5. Hang up the handset (call is transferred), or if in speakerphone  
mode, press SPEAKER to disconnect.  
The intercom party then has the call (if he or she answered the screened  
transfer with the handset). If you announce the transfer over the speaker,  
the intercom party’s telephone will ring with the transferred call after  
you hang up.  
Station User's Guide 5 – 1  
 
Transferring Calls  
GCA70–313  
5.2 Transferring Calls—Unscreened  
You can answer a call at your speakerphone and transfer it to another  
telephone. If you transfer the call without first announcing it, you have  
made an unscreened transfer.  
If the telephone to which you are transferring the call is busy, you must  
recover the call yourself or choose one of several options that may be  
available at your station. Also, if a transferred call is not answered after a  
certain length of time (as set by the installer), it recalls to your telephone.  
Again, you have several options for servicing the returning call.  
To transfer an unscreened call to another system telephone,  
1. Answer call.  
2. Press TRANSFER/CONFERENCE (the call is automatically  
placed on hold).  
3. Dial extension number of telephone to receive the transfer or press  
the DSS button for that extension.  
4. Announce call.  
5. Press SPEAKER to disconnect (if in speakerphone mode) or hang  
up. The transfer will ring at the called telephone.  
NOTE: Unscreened transfers ring at busy telephones and wait to be  
answered.  
If an unscreened transfer call is not answered and recalls to your  
telephone,  
1. Press flashing line button and lift handset.  
5 – 2 Station User's Guide  
 
GCA70–313  
Transferring Calls  
5.3 Making A Hot Transfer  
A hot transfer is a type of screened transfer. To perform a hot transfer,  
you voice announce the transfer over the speaker of the telephone that  
you want to receive the transfer, and release the call to that telephone.  
The system handled the release in a way that does not require the called  
party to retrieve the call (the call does not ring at the station).  
This feature is useful for transferring calls to people who need to work in  
a handsfree mode. Once you announce the call and the system completes  
the transfer, the person receiving the transfer can simply begin speaking  
toward his or her speakerphone to answer the call.  
If you make a hot transfer to a monitor telephone, you can voice  
announce the call over the telephone’s speaker, but the person receiving  
the outside line transfer will need to lift the handset to answer the call  
(the telephone will not ring after the announcement is made).  
Please note that you can not make a hot transfer to a telephone if its user  
has enabled the Voice Announce Block feature. This telephone will  
automatically ring with the transfer requiring the intercom party to  
answer it as either a screened or an unscreened transfer.  
To make a hot transfer to another telephone in the system,  
1. Answer call.  
2. Press TRANSFER/CONFERENCE (the call is automatically  
placed on hold).  
3. Dial extension number of telephone to receive the transfer or press  
the DSS button for that extension.  
4. Announce call.  
5. Press TRANSFER/CONFERENCE.  
6. Press SPEAKER to disconnect (if in speakerphone mode) or hang  
up. The person receiving the transfer than has the call.  
Station User's Guide 5 – 3  
 
This page remains blank intentionally.  
 
GCA70–313  
Conferencing Calls  
Conferencing Calls  
6
6.1 Conferencing Telephones Together  
When your join your speakerphone together with several other  
telephones on the same call, the result is called conferencing. When  
using the DXP system, you can make conference calls that involve up to  
five parties, including you as the originating party, in any combination of  
outside lines and intercom parties. When using the DXP Plus or FX  
Series system, you can include up to seven parties (in various  
combinations) in a conference call.  
If you are involved in a conference call with two outside lines, you can  
drop out of this established conference call and leave the outside lines in  
the conference with each other. This is known as an unsupervised  
conference call.  
To set up a conference call that includes any combination of  
outside lines and intercom parties,  
1. Make first call.  
2. Press TRANSFER/CONFERENCE; call is placed on hold  
automatically.  
3. Select next line and make next call.  
4. Press TRANSFER/CONFERENCE to establish conference.  
5. Repeat the last three procedures to add more parties.  
To continue conversation on remaining line after other outside  
lines have dropped out of conference,  
1. Press the line button of the remaining party.  
Station User's Guide 6 – 1  
 
Conferencing Calls  
GCA70–313  
To retrieve a line from hold and bring that party back into the  
conference,  
1. Press TRANSFER/CONFERENCE.  
2. Press line button.  
3. Press TRANSFER/CONFERENCE.  
NOTE: If all the conference circuits are busy, you will not be able to  
add a party to the conference.  
To drop out of a conference call between you and two outside  
lines (creating an unsupervised conference),  
1. Dial # (lines remain lighted and in use until one or both outside  
parties to disconnect; when only one party drops out of an  
unsupervised conference, the other party remains on hold until he  
hangs up or the line is answered).  
To rejoin an unsupervised conference between tow outside lines,  
1. Press TAP.  
NOTE: Conference volume levels depend on the quality of the external  
lines.  
To drop out of a conference call between you and two outside  
lines (creating an unsupervised conference),  
1. Dial # (lines remain lighted and in use until one or both outside  
parties disconnect; when only one party drops out of an  
unsupervised conference, the other party remains on hold until the  
line is answered).  
To rejoin an unsupervised conference between two outside lines,  
1. Press TAP.  
NOTE: Conference volume levels depend upon the quality of the  
external lines.  
6 – 2 Station User's Guide  
 
GCA70–313  
Using The Other Telephone Features  
Using The Other  
Telephone Features  
7
7.1 Blocking Voice-Announce Calls  
You can prevent voice announcements from sounding over your  
telephone speaker if you wish. This feature also blocks subdued off-hook  
voice announcements.  
To block voice-announced calls,  
1. Press INTERCOM.  
2. Dial 2.  
To un-block voice-announced calls,  
1. Press INTERCOM.  
2. Dial # 2.  
Station User's Guide 7 – 1  
 
Using The Other Telephone Features  
GCA70–313  
7.2 Diverting Incoming Calls To Another Station  
Call diverting permits you to send an incoming call to another station  
you have previously designated. You can divert an incoming call to the  
designated station whether you are busy or idle. You must program a  
CALL FORWARD button (using the instructions in the programming  
section) on your speakerphone to serve as a call divert button.  
To identify the station to receive diverted calls,  
1. Press INTERCOM.  
2. Dial 55.  
3. Dial extension number of station to receive diverted call.  
4. Press SPEAKER to end.  
To divert calls to the designated station,  
1. Hear ringing and/or see flashing line status light.  
2. Press CALL FORWARD (system immediately forwards ringing  
call to station you designated).  
7 – 2 Station User's Guide  
 
GCA70–313  
Using The Other Telephone Features  
7.3 Forwarding Calls  
You can permanently forward the calls that normally ring at your  
telephone to another telephone. You can forward just your prime line and  
intercom calls, or you can forward all of your calls. To remind you that  
your calls are being forwarded, your telephone will sound a short ring  
burst each time the system forwards a call.  
You can also forward calls that ring at your telephone but receive no  
answer; this feature is valuable if you are frequently away from your  
desk for short periods of time and find it inconvenient to permanently  
forward your calls every time you leave. The system installer sets the  
number of rings that sound at your telephone before the system forwards  
the calls.  
To forward your calls,  
1. Press installer-programmed FORWARD button,  
—OR—  
press INTERCOM and dial one of the following codes:  
52 = all calls forward immediately  
54 = all calls forward after RNA or Busy  
51 = prime line and personal intercom calls  
forward immediately  
53 = prime line and personal intercom calls  
forward after RNA or Busy  
2. Dial personal intercom number of telephone to receive forwarded  
calls or dial desired group intercom number.  
3. Press SPEAKER or hang up.  
To cancel call forwarding,  
1. Press INTERCOM.  
2. Dial #5. Your telephone automatically hangs up.  
Station User's Guide 7 – 3  
 
Using The Other Telephone Features  
GCA70–313  
7.4 Listening To A Call Over The  
Telephone Speaker (Group Listening)  
The 8124S, 8112S, and 8212S speakerphones give you the option of  
turning on the speaker in your speakerphone while you have the handset  
lifted. The distant party’s voice then sounds over the speaker as well as  
over the handset; however, only you handset microphone is active.  
The group listening feature also works if you are using your headset  
(only the headset microphone will be active).  
Refer to the chapter on programming for instructions on how to program  
the GROUP LISTEN button.  
To activate group listening while on a call,  
1. Press the preprogrammed GROUP LISTEN button.  
To cancel group listening,  
1. Press the preprogrammed GROUP LISTEN button again.  
NOTE: You should cancel Group Listening before hanging up the  
handset to end the call.  
7.5 MutingYourTelephone  
(not available on 8112N telephone)  
By using the MUTE button, you can block transmission of your voice to  
the distant party. You can do this whether you are using the handset or the  
speaker. For example, if someone comes into your office to talk to you  
and you do not want this conversation to interrupt the distant party, press  
the MUTE button. The MUTE button light turns on when you press it  
and turns off when you press it again.  
To mute your telephone,  
1. Press MUTE (MUTE function and light turn on). You can still  
hear the distant party, but he or she cannot hear you.  
To speak to the distant party,  
1. Press MUTE again (MUTE function and light turn off).  
7 – 4 Station User's Guide  
 
GCA70–313  
Using The Other Telephone Features  
7.6 Setting A Do Not Disturb  
Condition At Your Station  
The Do Not Disturb (DND) feature keeps calls from ringing at your  
speakerphone, and makes your station appear busy to intercom calls. If  
your installer has programmed your station to have this feature, you can  
enable it as needed.  
Generally, callers cannot override this feature. They hear two quick tone  
bursts every two seconds when they call a telephone that is set to DND  
mode. However, the installer may program some telephones with the  
ability to override a do not disturb condition at another telephone.  
You can program a permanent do not disturb button to provide yourself  
with quick access to this feature if you wish. See the programming  
section of this user’s guide for details.  
To enable DND,  
1. Press preprogrammed DND button. The light associated with the  
DND button turns on when the feature is active.  
To disable the DND condition,  
1. Press preprogrammed DND button. The light associated with the  
DND button turns off when the feature is disabled.  
To set a do not disturb condition at your telephone when a call  
rings at your station,  
1. Hear ringing.  
2. Press DND button. Ringing will stop, caller will hear the do not  
disturb tone, and your telephone will remain in DND until you  
disable the feature (described above).  
Station User's Guide 7 – 5  
 
Using The Other Telephone Features  
GCA70–313  
7.7 Setting The Volume Control  
The volume control on your telephone is a multipurpose control you can  
use to set the volume of the ringer, the speaker, the handset, the headset,  
background music, and the group listening mode. You can either press  
and hold down the VOLUME UP or VOLUME DOWN button to  
automatically step through the volume levels for each mode, or you can  
press the switch once for each change in volume you desire.  
You may adjust the loudness of the distant party at any time during a call  
whether you are listening over the speaker, the headset, the handset, or  
the group listen mode by pressing the VOLUME UP or VOLUME  
DOWN button. When the call ends, the system resets the loudness of all  
future calls to the programmed (default) setting.  
You can set a permanent loudness level for any volume control setting.  
When loudness is at desired level, dial ✳✳ 7 or press VOLSV button (if  
programmed). The volume level will remain at this loudness (referred to  
as the default setting) until you change the setting.  
NOTE: Impact SCS 8212S and Impact SCS 8212N telephones support  
the optional ICVOL handset. The ICVOL is an amplified  
handset with its own volume control, making it useful in noisy  
environments. For ordering information, contact your Comdial  
dealer.  
There are four ringer loudness levels (plus an off position). Set  
these levels as follows:  
1. While your telephone is on-hook and idle, press VOLUME UP or  
VOLUME DOWN once for each change in loudness that you  
desire. The ringer sounds once for each change as an example of  
the current setting. Your selection becomes the new default setting  
and will result in your telephone ringing at that level for all future  
calls (until you change the default by repeating the above  
procedure).  
NOTE: If you set the ringer to the “off” position, your telephone will  
sound a short ring burst once for each call you receive at your  
station while the ringer is off.  
NOTE: On the 8112N, the ringer volume is controlled by a  
three-position switch on the bottom of the telephone. There is  
no handset volume control.  
7 – 6 Station User's Guide  
 
GCA70–313  
Using The Other Telephone Features  
There are eight speaker loudness levels (not available on 8112N  
and 8212N telephones). Set these levels for the current call as  
follows:  
1. While on a call and in speakerphone mode, press VOLUME UP  
or VOLUME DOWN once for each change in loudness that you  
desire.  
There are at least eight handset loudness levels that you can set  
for the current call as follows:  
1. While on a call and in handset mode, press VOLUME UP or  
VOLUME DOWN once for each change in loudness that you  
desire.  
NOTE: On telephone models 8124S, 8112S, and 8112N, your installer  
may have turned on the “high handset volume” feature,  
providing 13 handset volume levels instead of 8  
There are at least eight headset loudness levels that you can set  
for the current call as follows:  
1. While on a call and in headset mode, press VOLUME UP or  
VOLUME DOWN once for each change in loudness that you  
desire.  
There are eight group listening loudness levels (not available on  
8112N and 8212N telephones). Set the level for the current call as  
follows:  
1. While on a call and in the group listening mode, press VOLUME  
UP or VOLUME DOWN once for each change in loudness that  
you desire.  
There are eight background music loudness levels (not available  
on 8112N and 8212N telephones). To set the level,  
1. While background music is on at your station, press VOLUME  
UP or VOLUME DOWN once for each change in loudness you  
desire. This level will remain set for background music until you  
change it again, even if you turn off the feature and then reactivate  
it.  
Station User's Guide 7 – 7  
 
Using The Other Telephone Features  
GCA70–313  
To set a permanent speaker, headset, handset, or group listening  
loudness for all future calls,  
1. Press INTERCOM.  
2. Activate speaker, headset, handset, or group listen mode to be  
affected.  
3. While in that mode, press VOLUME UP or VOLUME DOWN to  
adjust loudness.  
4. Dial 7 or press a preprogrammed VOLSV button to hold the  
loudness at the last setting for all future calls (until you change the  
default again).  
5. Repeat this procedure in each mode until you’ve set all default  
volume levels.  
7.8 Setting Your Personal Ringing Tones  
You can choose one of six different ring tones for your telephone. Often,  
when several telephones are located close together, each user chooses a  
different personal ring tone.  
To select one of the ring tones, proceed as follows:  
1. Press INTERCOM.  
2. Dial ✳✳ 4.  
3. Dial number (1–6) to select ring tone.  
4. The next time your telephone rings, you will hear the new ring  
tone.  
7 – 8 Station User's Guide  
 
GCA70–313  
Using The Other Telephone Features  
7.9 Using Background Music  
NOTE: This feature is not available on the 8112N and 8212N  
telephones.  
If the telephone system supplies background music, you can turn it on at  
your speakerphone while it is on-hook and idle. The system  
automatically turns background music off during calls and voice  
announcements.  
NOTE: The system can provide music from two sources; however, the  
system installer must enable this feature.  
To turn the music on,  
1. Press INTERCOM.  
2. Dial 11 for music source one or 12 for music source two (the  
SPEAKER light turns on when background music is on).  
3. Adjust music volume with the volume button.  
To turn the music off,  
1. Press INTERCOM.  
2. Dial # 1 (the SPEAKER light turns off when background music is  
off).  
Station User's Guide 7 – 9  
 
Using The Other Telephone Features  
GCA70–313  
7.10 Using The IMIST Module  
Impact SCS 8212S and 8212N telephones equipped with the optional  
IMIST module can support an IST device (modem, FAX machine,  
industry-standard telephone, etc.) in addition to the telephone.  
Depending on system programming, you can use the IST device to make  
outgoing calls and receive incoming calls.  
The functionality of the IMIST module depends on the type of system  
you are using and the type of digital station board and memory board  
your system has. (See your installer for complete details.)  
The IMIST module will function on a DXP system with the  
appropriate digital station board, but the IMIST module will not have  
its own extension number and will not function simultaneously with  
the speakerphone.  
On a DXP Plus system, the IMIST module will function  
simultaneously with the speakerphone and have its own extension  
number if your system has the appropriate digital station board and  
memory board. If your system does not have the optional enhanced  
memory board, the IMIST module will function like the one on the  
DXP system described above.  
On an FX Series system, the speakerphone and IMIST module can  
function simultaneously and the IMIST module has its own  
extension number.  
NOTE: The IMIST module does not provide voltage to light a message  
waiting light. Message waiting lights on devices plugged into  
the IMIST module will not function  
If you have any other questions about IST devices, refer to GCA70–237,  
Industry-Standard Telephone Station User’s Guide.  
NOTE: The IMIST module has a separate power supply. The wall  
transformer is a UL and CSA approved Class 2 device operating from  
120 Vac, 60 Hz, 16 watts and provides an output of 24 Vac at 450 mA.  
For replacement, order Comdial P/N DIU-PTR.  
Power  
IST Device  
scs04  
IMIST Device  
7 – 10 Station User's Guide  
 
GCA70–313  
Programming Your Telephone  
Sending And Receiving  
Non-Verbal Messages  
8
8.1 Using The Messaging Feature  
If the system installer designates your speakerphone as a central message  
desk or programs it to have message-wait originate ability, you can turn  
on the message-waiting light of any other telephone. This light lets that  
telephone user know that you have a message for him or her. In addition  
to the message waiting light, leaving a message indication at a station  
also causes the dial tone at that station to sound in a broken manner when  
the station user takes his or her telephone off-hook.  
The message-waiting light is located in different places on the various  
model telephones. On the 8124S and 8112S telephones, the message  
waiting light is located above the HOLD button. On the 8112N  
telephone, the message waiting light is located above the dial pad. The  
8212S and 8212N telephones have a dedicated message waiting key and  
light, labeled MESSAGE. For more information on button locations, see  
Chapter 1.  
If your telephone receives a message and has a DSS button that is  
programmed to call the station that left the message, the light next to that  
station’s DSS button on your telephone will flash.  
Station User's Guide 8 – 1  
 
Programming Your Telephone  
GCA70–313  
8.2 Lighting The Message-Waiting Light  
To turn on the message-waiting light (and a broken dial tone) at  
an idle telephone,  
1. Press INTERCOM.  
2. Dial 3.  
3. Dial extension number of station you wish to alert.  
The message-waiting light of that station will flash.  
To turn off the message waiting light at a busy or idle station,  
1. Press INTERCOM.  
2. Dial # 3.  
3. Dial extension number of station that was alerted. The  
message-waiting light of called station will turn off.  
To turn off the message waiting light during message-delivering  
conversation,  
1. Press INTERCOM; once if off-hook, twice if on-hook.  
NOTE: If the message-waiting light can only be turned off by either  
the person sending the message or the person receiving the  
message.  
8 – 2 Station User's Guide  
 
GCA70–313  
Programming Your Telephone  
8.3 Sending LCD Messages  
You can set system-supplied messages at your station to be received and  
displayed by a calling LCD speakerphone. These messages give the  
caller information on your telephone status. Get a list of the available  
messages from the attendant and write on the blank chart on the next  
page.  
To turn on LCD messaging,  
1. Press INTERCOM.  
2. Dial 02.  
3. Press # to clear current message if one is stored.  
4. Dial message code number (01–30).  
5. Press # and then press SPEAKER to end message.  
6. Your INTERCOM light flashes to indicate you have set LCD  
messaging.  
To send an LCD message when you call and receive a busy signal  
or no answer,  
1. While still on the call, press the appropriate fixed RESPONSE  
MESSAGE button to send a preselected message (Call [your  
name], for example) to the other telephone.  
To send an LCD message to a caller who has initiated a SOHVA  
or intercom call from another LCD telephone,  
1. Hear the SOHVA tone or voice announcement in your handset or  
headset.  
2. Press the appropriate fixed RESPONSE MESSAGE button to  
send a preselected message (I Will Call Back, for example) to the  
calling telephone.  
Station User's Guide 8 – 3  
 
This page remains blank intentionally.  
 
GCA70–313  
Programming Your Telephone  
Programming  
Your Telephone  
9
9.1 Programming For Speed Dialing  
Speed dialing is a feature that lets you:  
store and dial outside numbers using one or two buttons,  
store and dial intercom numbers,  
store frequently used feature codes.  
Your can store numbers for speed dialing at the following locations:  
any programmable button that is not now assigned as a line button  
or other feature by the system administrator or installer,  
keypad numbers 0–9,  
a secondary level at either storage location.  
Before you begin programming, write down the intercom or outside line  
you will use and the number digits you are storing. Then, as you program  
the speed dial numbers, write the first and second level numbers on your  
telephone’s ID strips. You can also fill out the charts on the next page, if  
you wish, for a personal record of your stored numbers.  
NOTE: You cannot reprogram the HOLD and INTERCOM button  
locations from your telephone; however, your installer can  
reassign these buttons to other locations on your telephone or  
to a console unit. Further, you cannot store a feature code on a  
second level at any storage location.  
NOTE: The Federal Communications Commission (FCC) requires  
that when programming emergency numbers and/or making  
test calls to emergency numbers:  
1. Remain on the line and briefly explain to the dispatcher the  
reason for the call.  
2. Perform such activities in the off-peak hours, such as early  
morning or late evening.  
Station User's Guide 9 – 1  
 
Programming Your Telephone  
GCA70–313  
9.2 Storing Speed Dial Numbers  
To store an outside number as a speed dial number,  
NOTE: Programming overwrites existing speed dial numbers at button  
locations.  
1. Press INTERCOM.  
2. Dial ✳✳ 1.  
3. Press programmable button or dial pad button to choose storage  
location (remember, to access second level storage at a  
programmable button, press SHIFT first.)  
4. Make your speed dial route selection choice from the following list:  
press line button to select outside line,  
dial 00 to select prime line or last line used,  
dial 01–16 to select line group,  
press INTERCOM button or dial 8 to select intercom.  
5. Dial number (up to 16 digits long—include and # if needed).  
NOTE: You may need a pause between numbers to compensate for  
differences in response time between your system and the host  
system (ask your attendant about this). To store a pause, press  
HOLD, then continue dialing. If your system is behind a host  
system that needs a hookflash to access a feature, press TAP to  
store a hookflash, then continue dialing.  
6. Press TRANSFER/CONFERENCE to store number.  
7. Press next location button and store next number, repeat previous  
steps until all numbers are stored,  
—OR—  
press SPEAKER to end.  
9 – 2 Station User's Guide  
 
GCA70–313  
Programming Your Telephone  
9.3 Storing DSS Numbers  
To store an intercom number at a DSS button,  
NOTE: Storing DSS numbers at button locations will overwrite any  
previously stored numbers.  
1. Press INTERCOM.  
2. Dial ✳✳ 3.  
3. Press programmable button to choose DSS location.  
4. Dial extension number.  
5. Press next location button and store next DSS number.  
6. Repeat the previous step until all DSS numbers are stored,  
—OR—  
press SPEAKER to end.  
Station User's Guide 9 – 3  
 
Programming Your Telephone  
GCA70–313  
9.4 Storing Feature Buttons  
If you find that you are using certain features often, you can create  
feature access buttons to make operations easier. Some features you may  
want to use frequently are defined as follows:  
Account Code Button (ACCT)—allows you to enter an account code  
for call record purposes.  
Automatic Call-Back Button (CAMP)—arranges the system to ring  
your telephone and another person’s telephone as soon as the other  
telephone becomes idle.  
Call Forward Button (CFWD)—allows you to forward all of your call  
to another telephone. You can program any one of four different feature  
buttons: Forward All (FWD-A), Forward Personal (FWD-P), Forward  
All RNA (FWDRA), and Forward Personal RNA (FWDRP).  
Do Not Disturb Button (DND)—prevents other telephones from ringing  
your telephone.  
Group Listen Button (GPLSN)—allows others to hear a conversation  
over the telephone speaker while you use the handset or headset; the  
distant party can hear only the conversation transmitted through the  
handset or headset microphone.  
Music Button (MUSIC)—allows you to enable or disable background  
music; also allows you to choose from tow pre-programmed music  
sources.  
Page Button (PAGE 1–8)—provides one-button access to paging zones  
1–8.  
Park Button (PARK)—parks calls in preselected park orbit.  
Pick-Up Button (PCKUP)—allows you to pick up a call ringing  
elsewhere in your system.  
Privacy Release Button (PRVCY)—releases privacy for current call.  
Saved Number Redial Button (SAVE)—redials the last number saved  
at this button location (good for short-term storage).  
Voice-Announce Block Button (VABLK)—blocks voice  
announcements.  
9 – 4 Station User's Guide  
 
GCA70–313  
Programming Your Telephone  
You can store feature access codes at programmable buttons to provide  
yourself with one-button access to features that you use often. The Quick  
Reference Guide at the end of this book contains a list of feature codes.  
To create a feature access button,  
1. Press INTERCOM.  
2. Dial ✳✳ 3.  
3. Press programmable button to choose storage location.  
4. Dial the access code for the feature.  
5. Press next location button and store next feature code.  
6. Repeat previous step until all desired feature codes are stored.  
7. Press SPEAKER to end.  
For example, the access code for the group call pick up feature is # 4. To  
program this feature, press INTERCOM, dial ✳✳ 3, press the desired  
programmable button, dial # 4, and press SPEAKER.  
Station User's Guide 9 – 5  
 
Programming Your Telephone  
GCA70–313  
9.5 Storing The Response Message Button  
You may program a RESPONSE MESSAGE button, which allows you  
to send an LCD message to a caller who has initiated a SOHVA or  
intercom call from an LCD telephone, or to send an LCD message to  
another LCD telephone that you call and receive a busy signal or no  
answer.  
A fixed RESPONSE MESSAGE buttons sends the same preselected  
message every time; you can program multiple fixed RESPONSE  
MESSAGE buttons at your station. If, for example, you know that you  
want to send the message I Will Call Back every time you receive a  
SOHVA you cannot respond to, program a fixed RESPONSE  
MESSAGE button with that message and label the button accordingly.  
You may save as many different fixed RESPONSE MESSAGE buttons  
as you need in order to respond instantly with the appropriate LCD  
message for any calling situation.  
To store a fixed RESPONSE MESSAGE button,  
1. Press INTERCOM.  
2. Dial ✳✳ 6.  
3. Press programmable button for RESPONSE MESSAGE button  
location.  
4. Dial message number (01–30) from list of messages.  
5. Press # to save programming.  
6. Press SPEAKER to end.  
7. Label button location.  
9 – 6 Station User's Guide  
 
GCA70–313  
DSS/BLF Console  
OperatingYourTelephone  
With A DSS/BLF Console  
10  
10.1 OperatingYourTelephone  
With A DSS/BLF Console  
The IB24X, IB48X, and IB64X consoles have additional buttons and  
status lights that extend the memory button capability of a companion  
telephone. You can program the buttons for automatic dialing (speed  
dial) or direct station selection (DSS) with busy lamp field (BLF) using  
instructions provided in chapter 9, Programming Your Telephone.  
When the installer assigns a DSS/BLF console to a station port, the  
system recognizes it as such and automatically clears the console buttons  
so you can store numbers at the buttons as you need them.  
ib64x  
IB64X DSS/BLF Console  
Station User's Guide 10 – 1  
 
DSS/BLF Console  
GCA70–313  
10.1.1  
Accessing The Button Levels  
The IB24X and IB48X DSS/BLF consoles have four levels of buttons,  
quadrupling the consoles’ button capacity. The four buttons at the bottom  
of each console allow you to select which button level is currently active.  
To change button levels, press one of the buttons at the bottom of the  
console. The leftmost button activates level 1, the next button activates  
level 2, etc. A light beside the appropriate button lights to indicate which  
level is currently active.  
ib48x  
ib24x  
Level access buttons  
Level access buttons  
IB24X DSS/BLF  
IB48X DSS/BLF Console  
10 – 2 Station User's Guide  
 
GCA70–313  
Troubleshooting Your Telephone  
Troubleshooting  
Your Telephone  
11  
Symptom  
INTERCOM light flashing.  
Possible Cause  
Your messaging is set. Press  
INTERCOM, then dial # 02 and  
hang up.  
Station is ringing with ringer off  
HOLD light flashing with no line Another telephone has activated  
on hold.  
your message waiting light. Press  
INTERCOM and then press  
HOLD to retrieve message. This  
action will call party who activated  
light. Once you have received a  
message, party who activated light  
(while still talking to you) must  
press INTERCOM to turn off the  
light.  
MUTE light on.  
MUTE is activated. To cancel,  
press MUTE.  
SPEAKER light on steady.  
Background music feature  
activated even thought the system  
does not provide background  
music. To cancel, press  
INTERCOM then dial # 1.  
Error Tone  
(three steady tones)  
May occur when incorrect buttons  
are pressed during speed dial  
programming. For example, if a  
button has a line assigned to it, or  
was not enabled for speed dial  
programming by the installer.  
If you cannot receive a voice  
announce call.  
Voice announce block is activated.  
To cancel, press INTERCOM  
then dial # 2.  
Station User's Guide 11 – 1  
 
This page remains blank intentionally.  
 
GCA70–313  
Index  
Index  
A
Access Codes, Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4 — 9–5  
Accessing The Button Levels On DSS/BLF Consoles . . . . . . . . 10–2  
Adjusting The Telephone Pedestal. . . . . . . . . . . . . . . . . . . . . . . . 1–11  
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Answering Intercom Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Answering Outside Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Answering SOHVA Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2  
Automatic Redial Feature. . . . . . . . . . . . . . . . . . . . . . . . . . 3–4 — 3–5  
B
Blocking Voice Announce Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1  
Button Levels, Accessing On DSS/BLF Consoles. . . . . . . . . . . . 10–2  
C
Call, Listening Over The Telephone Speaker . . . . . . . . . . . . . . . . 7–3  
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10  
Calls, Answering Intercom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Calls, Answering Outside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Calls, Blocking Voice Announce . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1  
Calls, Conferencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1  
Calls, Diverting To Another Station . . . . . . . . . . . . . . . . . . . . . . . . 7–2  
Calls, Forwarding To Another Station . . . . . . . . . . . . . . . . . . . . . . 7–3  
Calls, Holding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
Calls, Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1  
Calls, Making Intercom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6  
Camping On At A Busy Station And Waiting  
For An Automatic Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–8  
Camping On At A Busy Station And Waiting  
For An Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10  
Camping On At An Idle Station And Waiting  
For An Automatic Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9  
Conferencing Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1  
Conferencing Telephones Together . . . . . . . . . . . . . . . . . . . . . . . . 6–1  
D
Dialing Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1 — 3–2  
Dialing Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3  
Diverting Incoming Calls To Another Station . . . . . . . . . . . . . . . . 7–2  
Index – 1  
 
Index  
GCA70–313  
Do Not Disturb Condition, Setting At Your Station. . . . . . . . . . . . 7–9  
DSS/BLF Consoles, Accessing Button Levels On. . . . . . . . . . . . 10–4  
DSS Numbers, Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4  
F
Feature Buttons, Storing The . . . . . . . . . . . . . . . . . . . . . . . 9–4 — 9–5  
Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3  
G
Group Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4  
H
Hold, Placing Calls On. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1 — 4–2  
I
IMIST Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–10  
Intercom Calls, Answering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Intercom Calls, Making . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6 — 3–7  
Introducing The Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1  
K
Knowing Your Telephone’s Functions . . . . . . . . . . . . . . . . 1–7 — 1–8  
L
Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3  
LCD Messages, Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3  
Lighting The Message Waiting Light. . . . . . . . . . . . . . . . . . . . . . . 8–2  
Lights, Understanding What They Mean . . . . . . . . . . . . . 1–9 — 1–10  
Line Groups, Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5  
Listening To A Call Over The Telephone Speaker. . . . . . . . . . . . . 7–4  
M
Making A Hot Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3  
Making A SOHVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–11  
Making Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1  
Making Intercom Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6 — 3–7  
Message Waiting Light, Lighting The . . . . . . . . . . . . . . . . . . . . . . 8–2  
Messages, Sending And Receiving Non-Verbal. . . . . . . . . . . . . . . 8–1  
Messages, Sending LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3  
Music, Using Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–9  
Muting Your Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4  
2 – Index  
 
GCA70–313  
Index  
O
Outside Calls, Answering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
P
Parking Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3  
Pedestal, Adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11  
Personal Ringing Tones, Setting Your . . . . . . . . . . . . . . . . . . . . . . 7–8  
Placing Calls On Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
Programming For Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1  
Programming Your Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1  
Q
Queuing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6  
Quick Reference Guide . . . . . . . . . . . . . . . . . . . . Quick Reference – 1  
R
Redial Feature, Automatic . . . . . . . . . . . . . . . . . . . . . . . . . 3–4 — 3–5  
Redialing A Previously Dialed Number. . . . . . . . . . . . . . . 3–3 — 3–4  
Redialing A Saved Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4  
Redialing Last Dialed Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3  
Responding To A SOHVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2  
Response Message Button, Storing The. . . . . . . . . . . . . . . . . . . . . 9–6  
S
Saved Number Redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3 — 3–4  
Sending And Receiving Non-Verbal Messages . . . . . . . . . . . . . . . 8–1  
Sending LCD Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3  
Setting A Do Not Disturb Condition At Your Station . . . . . . . . . . 7–5  
Setting The Volume Control . . . . . . . . . . . . . . . . . . . . . . . . 7–6 — 7–8  
Setting Your Personal Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . . 7–8  
SOHVA, Making A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–11  
SOHVA, Responding To. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2  
Speakerphone, Using Your . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 — 1–4  
Speed Dial Numbers, Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2  
Speed Dialing, Programming For. . . . . . . . . . . . . . . . . . . . . . . . . . 9–1  
Storing Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4 — 9–5  
Storing DSS Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–3  
Storing Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2  
Storing The Feature Buttons. . . . . . . . . . . . . . . . . . . . . . . . 9–4 — 9–5  
Storing The Response Message Button . . . . . . . . . . . . . . . . . . . . . 9–6  
Subdued Off-Hook Voice Announcement, Making A . . . . . . . . . 3–11  
Index – 3  
 
Index  
GCA70–313  
Subdued Off-Hook Voice Announcement, Responding To . . . . . . 2–2  
T
Telephone Pedestal, Adjusting The . . . . . . . . . . . . . . . . . . . . . . . 1–11  
Transfer, Making A Hot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3  
Transferring Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1  
Transferring Calls—Screened . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1  
Transferring Calls—Unscreened . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2  
Troubleshooting Your Telephone . . . . . . . . . . . . . . . . . . . . . . . . . 11–1  
U
Understanding What The Lights Mean . . . . . . . . . . . . . . 1–9 — 1–10  
Using Background Music. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–9  
Using Line Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5  
Using The Other Telephone Features. . . . . . . . . . . . . . . . . . . . . . . 7–1  
Using This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 — 1–2  
Using Your Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 — 1–4  
V
Voice Announce Calls, Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1  
Volume Control, Setting The . . . . . . . . . . . . . . . . . . . . . . . 7–6 — 7–8  
W
Waiting For A Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6  
4 – Index  
 
GCA70–313  
Quick Reference Guide  
Appendix A  
Quick Reference Guide  
A
This chart provides you with a quick reference guide of the feature  
dialing codes. If you wish, you can detach this sheet and keep it near  
your telephone to serve as a stand alone reference. Remember, chapter 9  
describes how to program these codes on your telephone at unused  
programmable buttons. Further, the installer may store features at your  
telephone buttons and label the buttons with the feature’s mnemonics.  
NOTE: The dialing codes provided in this quick reference guide are  
default values. Your system installer has the ability to  
renumber these codes.  
The following table details several unique dialing codes that are only  
applicable to single line proprietary and industry-standard telephones.  
Button  
Mnemonic  
Feature  
Enable Code  
Disable Code  
INTERCOM 04  
Account Code  
All Call  
ACCT  
+ account code  
INTERCOM 70  
PAGE 1  
Attendant  
Calling  
INTERCOM 0  
Authorization INTERCOM # 08  
AUTH  
CAMP  
ARD  
Code  
+ authorization code  
Automatic  
Call Back and INTERCOM 6  
Call Waiting  
Automatic  
Redialing  
INTERCOM # 6  
INTERCOM # 1  
Background  
Music  
INTERCOM 11  
or 12  
MUSIC 1  
MUSIC 2  
Call Divert  
Station  
INTERCOM 55  
+ extension no.  
Call Forward, INTERCOM 51  
Personal + extension no.  
Call Forward, INTERCOM 52  
All Calls + extension no.  
INTERCOM # 5  
INTERCOM # 5  
FWD–P  
FWD–A  
Quick Reference – 1  
 
Quick Reference Guide  
GCA70–313  
Button  
Disable Code Mnemonic  
Feature  
Enable Code  
Call Forward,  
Ring—No Answer, INTERCOM 54  
All Calls  
INTERCOM  
FWDRA  
# 5  
Call Forward,  
Ring—No Answer, INTERCOM 53  
Personal Calls  
INTERCOM  
FWDRP  
# 5  
Call Park, Orbit  
91–99  
INTERCOM ✳  
(91–99)  
PARK  
1–9  
INTERCOM #  
(91–99)  
PARK  
1–9  
Call Park, Pick Up  
Call Pick Up,  
Directed  
Call Pick Up,  
Group  
Clear Major  
Alarm Ring  
INTERCOM 4 +  
DPKUP  
GPKUP  
extension no.  
INTERCOM # 4  
INTERCOM # 09  
DISA Access  
Installer Assigned  
Do Not Disturb  
INTERCOM # 01  
DND  
Do Not Disturb  
Override  
extension no. + 03  
EXOVR  
DSS Programming INTERCOM ✳✳ 3  
Executive Override extension no. + 03  
EXOVR  
HOLD  
HOLD  
Hold, Manual  
Hold, Exclusive  
Hold, Directed  
HOLD  
HOLD + HOLD  
INTERCOM 90  
Hold, Directed  
Pick Up  
INTERCOM # 90  
INTERCOM 02 INTERCOM  
LCD Messaging  
Line Group 1  
LCDMS  
LNG01  
+ message  
# 02  
INTERCOM 9  
LNG02–1  
1
Line Groups 2–11 INTERCOM 80–89  
LNG12–1  
6
Line Groups 12–16 INTERCOM 60–64  
Line Pick Up From  
Any Station, Zones INTERCOM 65–68  
TAFS1–4  
1–4  
2 – Quick Reference  
 
GCA70–313  
Quick Reference Guide  
Button  
Disable Code Mnemonic  
Feature  
Enable Code  
Line Pick Up  
From Any  
Station, Zones  
1–4  
INTERCOM  
65–68  
TAFS1–4  
Line Pick Up  
From Any  
Station, All  
Zones  
Meet Me  
Answer Page  
INTERCOM 69  
INTERCOM 78  
TAFS✳  
MMEPG  
INTERCOM 3 INTERCOM # 3  
Message Waiting  
MSGWT  
+ extension no.  
+ extension no.  
Message Wait  
Retrieval  
# 00  
Night Transfer  
(Attendant Only) 0 031  
Operator Access INTERCOM 0  
Paging, All Call INTERCOM 70  
INTERCOM #  
INTERCOM #  
0 032  
NIGHT  
PAGE 1  
Paging, Zones  
2–8  
INTERCOM  
71–77  
PAGE  
2–8  
Paging, Meet Me INTERCOM 78  
MMEPG  
Park Orbit  
Retrieve  
INTERCOM #  
91–99  
PARK  
1–9  
INTERCOM  
9199  
PARK  
1–9  
Park Orbit Send  
Personal  
Ringing Tones  
INTERCOM ✳ ✳  
4 + tone code (1–8)  
Redial Last  
Dialed Number  
#
Remote Station  
Disable  
INTERCOM ✳  
INTERCOM #  
05 + extension no. 05 + extension no.  
RSPnn  
(nn =  
1–30, )  
Response  
Message  
INTERCOM ✳✳  
6 + button + 01–30  
Service  
Observing  
INTERCOM # 03  
+ extension no.  
S–OBS  
Speed Dial,  
Station  
1–0  
Quick Reference – 3  
 
Quick Reference Guide  
GCA70–313  
Button  
Mnemonic  
Feature  
Enable Code  
Disable Code  
Speed Dial,  
System  
100 599  
Speed Dial,  
Programming  
INTERCOM  
✳✳ 2  
INTERCOM #  
04 + code  
Station Lock  
LOCK  
Tracker Page,  
Send  
INTERCOM  
8  
TRACK  
Tracker Page,  
Receive  
INTERCOM #  
8 + orbit code  
Tracker Pager  
Use  
INTERCOM # INTERCOM #  
07  
06  
INTERCOM  
✳✳ 7  
Volume Save  
VOLSV  
VABL K  
Voice  
Announce  
Block  
INTERCOM  
2  
INTERCOM #  
2
NOTE: The dialing codes provided in this quick reference guide are  
default values. Your system installer has the ability to  
renumber these codes.  
Feature  
Pick Up Last Line  
Broker’s Mode  
Enable Code  
08  
07  
Speed Dial Access Code 01  
Saved Number Redial  
Dial Saved Number  
TAP Dialing Code  
06  
09  
##  
4 – Quick Reference  
 
NOTES  
 
NOTES  
 
NOTES  
 
NOTES  
 
Thismanual hasbeen developedbyComdial Corporation(the  
“Company”) and is intended for the use of its customers and  
service personnel. The information in this manual is subject  
to change without notice. While every effort has been made  
to eliminate errors, the Company disclaims liability for any  
difficulties arising from the interpretation of the information  
contained herein.  
The information contained herein does not purport to cover  
all details or variations in equipment or to provide for every  
possible contingency to be met in connection with  
installation, operation, or maintenance. Should further  
information be desired, or should particular problems arise  
which are not covered sufficiently for the purchaser’s  
purposes, contact Comdial, Inside Sales Department, P.O.  
Box 7266, Charlottesville, Virginia 22906.  
 
R
Charlottesville, Virginia 22901-2829  
Printed in U.S.A.  
GCA70–313.04  
8/97  
 

Tektronix Sprinkler 453 User Manual
Thermo Products Furnace OH11 105E User Manual
Toshiba Universal Remote GMAA00228010 User Manual
Toshiba VCR RD XV47KE User Manual
Tripp Lite Surge Protector TLP606 User Manual
Vantec Surge Protector SPK 08UV BK User Manual
Viper Automobile Alarm Model 160XV User Manual
Vision Fitness Bicycle ET X6200HRT User Manual
Vista Answering Machine 20SE User Manual
Weed Eater Blower 545117535 User Manual