SAFETY PRECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR
BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The graphic symbols on the back cover of the set mean the following:
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) in-
structions in the literature accompanying the appliance.
WARNING :
•
•
•
•
To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
The apparatus shall not be exposed to dripping or splashing, No objects filled
with liquids, such as vases, shall be placed on the apparatus.
The mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
In order to disconnect the apparatus from the mains completely, the mains plug should
be disconnected from the mains socket outlet completely.
INSTALLATION
LOCATE the receiver in the room where direct light does not strike the screen. Total darkness
or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recom-
mended for comfortable viewing.
ALLOW enough space between the receiver and the wall to permit proper ventilation.
AVOID excessive warm locations to prevent possible damage to the cabinet or component
failure.
CONNECTION
This TV receiver is connected to AC: 220-240V~ 50Hz .
AUTOMATIC DEGAUSSING
All colour television receivers are sensitive to magnetic influences, usually caused by either
moving the receiver from one place to another or using certain electrical appliances near the
receiver. This residual magnetism as it is called, sometimes causes distortion which gives rise
to "blotchy" areas of colour in the picture. To avoid these effects the receiver incorporates an
automatic degaussing circuit which operates for a short while immediately each time the
receiver is switched on using the mains switch. This circuit removes any residual magnetism in
the metal parts of the picture tube and therefore ensures that each time the receiver is switched
lifelike. If the set is moved or faced in a different direction, the mains switch must be switched
off at least 10 minutes in order that the automatic degaussing circuit operates properly.
3
SAFETY PRECAUTIONS
CAUTION
Never tamper with any components inside your set, or any other adjustment controls not
mentioned in this manual. All television receivers are high voltage instruments. Your PICTURE
TUBE is a highly vacuum. If broken, glass fragments will be violently expelled. Scratching,
Chipping or undue pressure is dangerous and should be avoided. When you clean the PICTURE
TUBE FACE or CABINET, the power cord should be removed from the wall socket then wipe the
receiver with a dry soft cloth. All "inside work" on your receiver must only be performed only
by the Professional Service Personnel.
DANGER
LASER SAFETY
This unit employs an optical laser beam system in the CD
mechanism,designed with built in safeguards. Do not attempt
to disassemble, refer to qualified service personnel.
Exposure to this invisible laser light light beam may be harmful
to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS,
Invisible laser radiation when open
ORADJUSTMENTSORPROCEDURESOTHER THANTHOSE
and interlock failed or defeated.
SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LA-
avoid direct exposure to laser beam.
SER LIGHT BEAM EXPOSURE.
Manufactured under license from Dolby Laboratories “Dolby”,”Pro Logic”and the double-D
symbol are trademarks of Dolby Laboratories. Confidential unpublished works.© 1992-1997
Dolby Laboratories,lnc.All rights reserved.
This product incorporates copyright protection technology that is protected by U.S. pat-
ents and other intellectual property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse engineering or disas-
sembly is prohibited.”
4
LOCATION OF CONTROLS
1. Speaker
2. Power Button
3. Channel Buttons
4. Menu Button
5. TV/AV/DVD Button
6. DVDDoor
7. Remote Sensor
8. DVD Stop Button
9. DVD Play Button
10. Volume -/+ Buttons
11. DVD Open/Close Button
12. Side Audio (R) Input (AV 2)
13. Side Audio (L) Input (AV 2)
14. Side Video Input (AV 2)
15. Earphone Jack
16. 75 ohm Antenna Socket
17. Back Video/Audio Output
18. Back Video/Audio Input(AV 1)
19. Audio digital Out Socket (For DVD only)
5
|