Tascam Music Mixer SX1OS User Manual

SX1OS V1.50 Final Release Notes  
This document contains additional information and corrections that did not make it into the manual in time.  
Manual corrections  
Mixer 13:  
The SX-1 does not post the progress bar for single  
VGA 17:  
The Gain/Fade Edit Operation is no longer in the  
undo and redo operations, only for multiple  
operations, like when an item in the VGA history  
list is double clicked on directly.  
SX-1OS, the audio event shapes allow you to do  
the same thing in a non-destructive way. The Level  
edit-op is now called "Gain" in the UI.  
VGA 11:  
VGA 18:  
The MIDI Activity described, where the MIDI icon  
blinks the keyboard note, is only active when the  
slot Input Monitor is ON.  
Note that the selection mode must be Event  
Selection for shift+alt+M to toggle the mute status  
of the selected events.  
VGA 13:  
Transport 6:  
Note that the SX-1 does not support double  
clicking on MIDI events in the upper track region  
to open the event editor, only MIDI events in the  
piano roll. Audio events can be double clicked on  
in the upper track region or the waveform tab.  
The description of the Re-lock threshold parameter  
omits an explanation of the "Automatic" setting.  
This corresponds to 1/3 frame when the timecode  
source is LTC, and 10 frames when the timecode  
source is MTC.  
VGA 16:  
The name of the new Edit Operation was changed  
from "Level" to "Gain" after the manual was  
printed.  
Additions  
Selecting everything between two points.  
Clip duration display  
It is now possible to select a region of time across all  
tracks, including Audio, MIDI and Automation. This  
allows the user to easily do block copy and paste  
operations on whole sections of a project or song.  
First Select a region of time, the begin and end  
registers are used for this operation.  
>From the keyboard, press alt+shift+S.  
or From the VGA, click on the Edit Menu, "Select  
Time" entry.  
On the VGA display on the track screen clip browser  
and clip import panes, the SX-1 shows detailed  
information about the currently selected clip. Prior to  
V1.50, the "Length" time field was calculated from  
the clip length and the current project sample rate.  
There is also a field that shows the original sample  
rate of the clip, so in V1.50 the Length field has been  
split into two items, one where the time duration is  
calculated from the clip's original sample rate -> "Clip  
Length", and one where the time duration is  
calculated from the current project's sample rate ->  
"Project Length".  
or From the front surface, press and hold SHIFT, then  
press SELECT in the EDITING section.  
New Front surface shortcut.  
These values will only differ when the clip's sample  
rate is different from the current project's rate.  
Pressing and holding the front panel CANCEL button  
followed by the SELECT button in the EDITING  
section will unselect all events and tracks. If SHIFT  
and CANCEL are both pressed, then the above  
"Select Time" function will still be invoked.  
TASCAM SX1OS V1.50 Final Release Notes  
1
 

Tascam Car Amplifier US 16x08 User Manual
Tascam CD Player CD DJ1 User Manual
TDK Network Card HHM Series HHM2411 User Manual
Toshiba DVD Player DR420 User Manual
Toshiba TV Receiver DLVM GC User Manual
TP Link Switch TL SL2109 User Manual
Vantec Network Card NexStar DX User Manual
Vizio Universal Remote E3D320VX User Manual
Vornado Fan Flippi User Manual
Vulcan Hart Range 160L User Manual